- The main technical parameters
- Main technical characteristics
- Main specifications of machine
★ Machine type: long cylinder block
★ Maximum working pressure: 0.4Mpa
★ Design pressure: 0.44Mpa
★ Design temperature: 140℃
★ The highest working temperature: 135℃
★ Temperature rising rate: 20℃~130℃ around 35 minutes (saturation vapor pressure is 0.7Mpa)
★ Cooling rate: 130℃~80℃ around 25 minutes (cooling water pressure is 0.3Mpa) cooling water temperature: 20℃~30℃
★ Bath ratio: as low as 1:4~6
★ Ultra-low bath ratio, bath ratio can be as low as 1:4 ~1:6.
★ Large capacity,capacity on the original basis can be increased by about 100% of the output.
★ The fabrics easy generation of crease can less one presetting tosave cost.
★ Low energy consumption per ton of cloth(save about 50%for water,electricity,steam and additive on the original basis separately).
★ Flexible flow of water to minimize surface impact on high-grade fabric to ensure no fluffing and no distortion on yarn.
★ Unique elbow design can reach the dead angle with minimum tension.
★ Suitable for a wide range of varieties,from ordinary knitted fabric to the latest development of elastic fabric, all can be applied.It is suitable for special operation requirements on elastic cloth and low tension cloth.
★ Simple operation and maintenance.